Palmer Safety builds fall protection for crews working at height, from compact personal self-retracting lifelines (SRLs) and full-body harnesses to lanyards, anchors, vertical lifelines, horizontal lifeline systems, and complete fall protection kits. The lineup covers everyday construction and industrial applications as well as Class 2 leading-edge applications where the anchorage location and potential edge exposure require equipment designed for that use.
Palmer has become an especially strong choice for crews that need to equip multiple workers without giving up current fall-protection features. At Bishop Lifting, some of the most frequently purchased Palmer products are the compact MicroBEAST EDGE™ personal SRLs, including single- and twin-leg Class 2 configurations.
Shop Palmer Safety fall protection by type
Self-Retracting Lifelines
Palmer offers compact personal SRLs as well as longer web and cable units for a wide range of fall-arrest applications. Choose between Class 1 and Class 2 designs based on the anchorage location, work environment, required length, and potential for leading-edge exposure.
Full-Body Harnesses
Palmer harnesses range from straightforward dorsal D-ring models to padded construction and specialty configurations with additional attachment points and positioning features. Fit, connector style, D-ring configuration, and the work being performed should drive the selection.
Lanyards
Shock-absorbing lanyards remain a practical connecting option when the work area and available fall clearance allow their use. Palmer offers single- and twin-leg configurations for restraint, positioning, and personal fall-arrest applications.
Anchors + Lifeline Systems
A complete system starts with a suitable anchorage. Palmer offers anchorage connectors along with vertical and horizontal lifeline systems for applications where workers need protected movement across a larger work area.
Palmer Safety Class 1 vs. Class 2 SRLs
Do not choose an SRL on length alone. One of the most important questions is where the unit will be anchored relative to the worker. Palmer offers SRLs built to current ANSI Z359.14 Class 1 and Class 2 requirements, including compact Class 2 MicroBEAST EDGE™ units for applications where leading-edge and below-D-ring capability is required.
| Class 1 SRL | Class 2 SRL | |
|---|---|---|
| Start here when | The application does not require Class 2 leading-edge or below-D-ring capability | The application involves a leading edge or anchorage at or below the worker's dorsal D-ring |
| Typical Palmer options | BEAST™ and MicroBEAST™ Class 1 web or cable SRLs | MicroBEAST EDGE™ and BEAST EDGE™ Class 2 SRLs |
| Available formats | Personal web units and longer web or cable SRLs | Personal web SRLs plus longer leading-edge cable units |
| What still matters | Fall clearance, anchorage, worker capacity, connector compatibility, and application | Edge exposure, setback, fall clearance, anchorage, worker capacity, and connector compatibility |
⚠ Class 2 does not eliminate the need to calculate fall clearance
A leading-edge-rated SRL is not a universal answer for every edge condition. Anchorage location, available clearance, edge geometry, worker weight, swing-fall exposure, and the manufacturer's instructions all matter. Select and install the complete personal fall-arrest system for the actual work being performed.
Popular Palmer Safety SRLs
Palmer's compact Class 2 MicroBEAST EDGE™ models are among the Palmer products our customers purchase most often. The differences are primarily in single- versus twin-leg configuration and the connector at the working end.
| Model | Configuration | Good starting point for |
|---|---|---|
| SRL121132 | 6 ft Class 2 single-leg web SRL-P with small snap hook | Compact personal fall protection where a standard snap-hook connection is preferred |
| SRL121122 | 6 ft Class 2 single-leg web SRL-P with rebar hook | Applications requiring a larger-opening working-end connector |
| SRL121132T | Twin 6 ft Class 2 web SRL-P with small hooks | Continuous tie-off while moving between compatible anchor points |
| SRL121122T | Twin 6 ft Class 2 web SRL-P with rebar hooks | Continuous tie-off where larger-opening connectors are required |
| SRL411212 | 12 ft Class 2 galvanized cable SRL | Leading-edge applications needing more working range than a 6 ft personal SRL |
✓ Single-leg or twin-leg?
If the worker remains connected to one suitable anchorage, a single-leg SRL is usually the simpler setup. Twin-leg personal SRLs are useful when the job requires moving between compatible anchor points while maintaining continuous connection. Do not use the second leg simply because it is there—the manufacturer's instructions govern how unused and active connectors are parked and connected.
Build the complete fall protection system
An SRL, lanyard, or harness is only one part of the system. A useful way to think about personal fall protection is Anchorage + Body Support + Connection. Each component needs to be compatible with the others and appropriate for the work environment.
| System component | What it does | Palmer products to consider |
|---|---|---|
| A — Anchorage | Provides the secure attachment point for the fall-protection system | Anchorage connectors, concrete anchors, cross-arm straps, horizontal lifeline systems |
| B — Body Support | Distributes fall-arrest forces across the worker's body | Full-body harnesses with the D-ring and adjustment configuration required for the job |
| C — Connection | Connects the harness to the anchorage while controlling or arresting a fall | Self-retracting lifelines, shock-absorbing lanyards, vertical lifelines, and compatible connectors |
Palmer Safety harnesses by configuration
Palmer model names tell you most of what you need before you open the page. The number and letter prefix is the D-ring count, and the suffix is the leg-buckle style: T&B for tongue-buckle legs, QC for quick-connect. Under 29 CFR 1926.502(d)(17) the fall-arrest attachment point sits in the center of the back near shoulder level, so every configuration below carries a dorsal D-ring. The extra rings are what change the job it suits.
| Model family | Rings / legs | Start here when |
|---|---|---|
| 1D T&B Standard | Dorsal only, tongue-buckle | Straight fall arrest, one worker, lowest cost per unit when outfitting a crew |
| 3D T&B Hammerhead | Dorsal + two side, tongue-buckle | Work positioning is part of the task and the side rings will actually get used |
| 4D QC G-Series | Dorsal + two side + sternal, quick-connect | Crews donning and doffing repeatedly through a shift, or ladder climbing off the front ring |
| 1D T&B Oil Derrick | Dorsal, derrick configuration | Derrick and mast work where the harness has to suit sustained elevated positions |
| 5D QC Akula | Five rings, quick-connect | Rope rescue and technical work needing ventral and sternal attachment alongside fall arrest |
Sizing, capacity range and the exact ring layout are listed on each product page. If you are equipping a crew rather than one worker, the full body harness kit bundles harness, lanyard and bag in one line item. Shop All Fall Protection Harnesses →
Guardrail, warning line and site protection
Not every fall hazard is solved by strapping the worker to something. Passive systems protect everyone on the deck without requiring training, inspection or a rescue plan, and OSHA writes separate criteria for each type. The three approaches below are not interchangeable.
| System | OSHA criteria that govern it | Palmer products |
|---|---|---|
| Guardrail system | 1926.502(b): top edge 42 in ±3 in; withstands 200 lb applied within 2 in of the top edge in any outward or downward direction; must not deflect below 39 in under that load; midrails withstand 150 lb | Parapet clamp stanchion, C-slab grabber stanchion |
| Warning line system | 1926.502(f): erected no less than 6 ft from the roof edge; line flagged at intervals no greater than 6 ft; line sits 34 to 39 in above the surface; stanchion resists 16 lb horizontal without tipping | Guardrail warning line stanchion |
| Personal fall arrest | 1926.502(d): limits arresting force to 1,800 lb with a harness; free fall no more than 6 ft and no contact with a lower level; deceleration distance no more than 3.5 ft; employer must provide for prompt rescue | SRLs, harnesses, lanyards, anchors |
⚠ Never anchor a lanyard or SRL to a guardrail
29 CFR 1926.502(d)(23) states plainly that personal fall arrest systems shall not be attached to guardrail systems. A guardrail is engineered to resist 200 lb of leaning force. A fall-arrest anchorage under 1926.502(d)(15) has to support 5,000 lb per attached worker, or be designed under a qualified person as part of a system with a safety factor of two. Those are different orders of magnitude. If the crew has no other attachment point, that is an engineering problem to solve before the shift starts, not at the edge.
Gloves, connectors and rescue gear
Cut and Impact-Resistant Gloves
Palmer's glove line runs from the hi-vis PS360 and PS933 through the X64, X55 and the lower-profile G-Flex. Cut and puncture ratings differ by model and are listed on each product page. Buy to the hazard you actually have; the highest-rated glove on the rack is often the one crews take off because they cannot feel the shackle pin.
Connectors, Carabiners and Rebar Hooks
Since January 1, 1998, 1926.502(d)(5) has permitted only locking-type snaphooks in fall protection, and every Palmer connector we stock is double-locking. Choose by what the working end has to capture: steel rebar snap hooks for large-opening connections, modified-D carabiners for standard rings, HMS-style carabiners where the connection is wider.
Rescue, Retrieval and FR Workwear
1926.502(d)(20) puts the rescue duty on the employer, not the fire department. Palmer covers that side with the 60 ft SRL-D and 115 ft SRL-R retrieval winches, a dedicated confined space retrieval winch, and trauma rescue straps that let a suspended worker relieve leg pressure while help arrives. The 7 oz FR cotton coverall rounds out the line for energy and utility work.
Common questions about Palmer Safety
Is Palmer Safety OSHA approved?
No product from any manufacturer is. OSHA has stated in its interpretation letters that it does not test, approve, certify or endorse any equipment, and that it has neither the legal authority nor the resources to certify manufacturers' products. Any brand advertising itself as OSHA approved is telling you something that cannot be true. What OSHA does is write performance criteria, and compliance is the employer's responsibility based on the equipment meeting those criteria and being used correctly. The useful question to ask a supplier is which standard a given item was tested to, not whether OSHA blessed it.
Is Palmer Safety a good brand?
For its price position, yes, and we would rather be specific than enthusiastic about it. Palmer's strength is equipping a whole crew without dropping to equipment that fails current requirements, which is why the MicroBEAST EDGE personal SRLs are among the Palmer items our customers reorder most. It is not a premium technical-rescue line, and we do not present it as one. If the job calls for that tier we will point you at a different brand on our shelf rather than oversell this one.
What is a "yoyo" in fall protection?
Jobsite slang for a self-retracting lifeline. The name comes from the way the line pays out and retracts under light tension as the worker moves, then locks when it accelerates. If someone asks for a Palmer yoyo they mean an SRL, and the Class 1 versus Class 2 question above is the one that decides which unit is correct.
Does a parapet wall count as a guardrail?
Only if it meets the height and strength criteria on its own. Under 1926.502(b)(2), a midrail or equivalent intermediate member is required between the top edge and the working surface unless there is a wall or parapet at least 21 inches high. The top edge still has to sit at 42 inches plus or minus 3, and still has to take 200 pounds. A parapet clamp stanchion exists precisely because most parapets fall short of those numbers by themselves.
How often does fall protection equipment need inspecting?
Before every use. 1926.502(d)(21) requires personal fall arrest systems to be inspected prior to each use for wear, damage and deterioration, with defective components removed from service. Separately, 1926.502(d)(19) requires that any system or component that has taken a fall be pulled immediately and kept out of service until a competent person determines it is undamaged. Manufacturer instructions set the documented periodic interval on top of that. A harness that arrested a fall does not go back in the gang box.
Can I mix Palmer components with another brand's harness?
Connector compatibility governs, not the logo. 1926.502(d)(5) requires a snaphook sized to be compatible with what it connects to, and (d)(6) prohibits several specific connections unless the hook is a locking type designed for them, including hooking directly to webbing, hooking two snaphooks together, or clipping to a D-ring that already has a connector in it. Check the manufacturer instructions for both halves before pairing them. Our branch staff will work through a mixed setup with you if you are unsure.
Outfitting a crew, not just a worker?
Multi-unit harness, SRL and guardrail orders are worth quoting. Tell us the work and the head count and we will size the package.
Not sure which class or configuration fits? Contact us and talk to a branch.
★ 10K+ 5-Star Shopper Approved Ratings • Trust the Lift